Description
Product Highlights
• 17” 1366 x 768 (16:9) Resolution
• Matte Finish Panel
• Supports TVLogic Color Calibration Utility for proper color alignment
• Firmware update by using Ethernet or USB
• GPI (RJ45)
• Waveform/Vectorscope (Y/Cb/Cr, RGB, Wide Type, Line Waveform)
• Range Error
• Marker
• User Aspect
• Blue Only / Mono
• X3 Zoom(PBP)
• Key lock
• Selectable 3 function keys
• H/V Delay
• Timecode Display
• UMD support (ANC, Manual, Dynamic & User)
• Closed Caption: CEA-608/708 (SDI), OP-42, OP-47, Line 21, ANC
• Monitor control by using RS422/Ethernet
• Focus Assist
Technical Specifications
LCD Size 17 inch
Resolution 1366×768 (16:9)
Luminance 350cd/m2
Dot Pitch 0.273×0.273 mm
Colour 16.7M (true), 24-bit
Viewing Angle (Typical) H : 178 degrees – V : 178 degrees
Luminance of White 350cd (center)
Contrast 900:1
Display Area 372.9 × 209.6 mm
Input 1 x DVI-I: DVI IN / VGA IN
1 x HDMI: HDMI Input
3 x BNC: Analogue Input
2 x BNC: SDI A/B Channel Input
Output 3 x BNC: Analogue Loop Through Output
2 x BNC: SDI A/B Channel Output
Input Signal Analogue: Composite / S-Video / Component / RGB
HD-SDI: 1.485Gb/s
SD-SDI: 270Mbps
HDMI: 720p / 1080i & VESA / IBM Modes
DVI-Analogue: 640×480/800×600/1024×768/1280×768/1280×1024/1366×768/720×400
DVI-Digital (Graphic): 640×480/800×600/1024×768/1280×768/1280×1024/720×400
DVI-Digital (Video): 1080p (24/25/30/50/60)/1080i (50/60)/720p (50/60)/480i (60)/480p (60)/576i (50)/576p (50)
Analogue Input Spec Compsite: 1.0Vpp (With Sync)
S-Video: 1.0Vpp (Y With Sync), 0.286 Vpp (C)
Component: 1.0Vpp (Y With Sync), 0.7 Vpp (Pb, Pr)
RGB: 1.0Vpp (G With Sync), 0.7 Vpp (B, R)
SDI Input Signal Formats SMPTE-425M-A/B: 1080i (60/59.94/50), 1080p (60/59.94/50/30/29.97/25/24/23.98/30sF/29.97sF/25sF/24sF/23.98sF)
SMPTE-274M: 1080i (60 / 59.94 / 50), 1080p (30 / 29.97 / 25 / 24 / 24sF / 23.98 / 23.98sF)
SMPTE-296M: 720p (60 / 59.94 / 50)
SMPTE-372M: Dual HD-SDI YPbPr (4:2:2) – 1080p (6 0 / 5 9.94 / 50), Dual HD-SDI YPbPr /RGB (4:4:4) – 1080p (30 / 29.97 / 25 / 24 / 24sF /23.98 / 23.98sF)
SMPTE-260M: 1035i (60 / 59.94)
SMPTE-125M: 480i (59.94)
ITU-R BT.656: 576i (50)
2K Format: 2048 x 1080p (24/24sF/23.98/23.98sF)
Audio In Embedded Audio / Analogue stereo (Phone Jack)
Audio Out Analogue stereo (Phone Jack) / Internal Speaker (Stereo)
Power AC 100 – 240V / DC 12V / DC 24V
Power Consumption (Approx.) 60 Watts
Operating Temperature 0 °C to 40 °C
Storage Temperature -20 °C to +60 °C
Dimensions without Stand (WxDxH) 42.7 cm x 9.0 cm x 31.0 cm
Dimensions with Stand (WxDxH) 47.4 cm x 15.0 cm x 32.7 cm
Weight 7.1 kg
Power Consumption
⚡ TVLogic LVM-173W-3G 17″ • Electrical & Power Profile
- Operating Voltage: 12V to 24V DC (4-Pin XLR DC Input) / 100V to 240V AC (50/60Hz Internal Power Supply)
- Power Draw (Typical Studio / Video Village Brightness): ~26W to 28W
- Power Draw (Maximum Peak Load): 32W DC / 35W AC (Official TVLogic maximum rating at 100% 400-nit brightness with dual 3G-SDI inputs, waveform/vectorscope, and audio de-embedding active)
- On-Board Battery Standard: Rear V-Mount battery plate connected via 4-pin XLR DC input (14.4V or 24V compatible; cannot be powered by 7.4V NP-F batteries)
- External Supply Options: Mains AC power cord (IEC) or 4-pin XLR DC input from high-capacity V-Mount / block batteries
⏱️ Estimated Operating Runtimes (32W Maximum DC Draw @ 85% Efficiency)
- 🔋 V-Mount 98Wh (via Rear Plate / 4-Pin XLR): ~2.6 hours (2h 36m)
- 🔋 V-Mount 150Wh (via Rear Plate / 4-Pin XLR): ~4.0 hours (3h 59m)
- 🔋 V-Mount 190Wh (via Rear Plate / 4-Pin XLR): ~5.0 hours (5h 03m)
- 🔋 V-Mount 290Wh (Recommended for Video Village): ~7.7 hours (7h 42m)
📊 Engineering Note: The 85% Efficiency Standard
- Usable Energy Derating: Published calculations apply a standard 0.85 multiplier (Usable Wh = Rated Wh × 0.85). Production monitors enforce an automated low-voltage cutoff (~11.5V) to maintain stable Rec.709 color calibration across the discharge curve, while the remaining variance accounts for internal DC-DC conversion heat loss.
⚠️ Production Advisory: If mounting a wireless video receiver (such as a Teradek Bolt or Hollyland Mars RX) via a V-Mount sandwich plate on the back of the LVM-173W-3G, add ~7W–10W to the total load when calculating battery swaps for Video Village.
🛠️ Full Rig Planning: Calculating battery requirements for an untethered Video Village cart? Access the interactive FRENEL Power & Battery Runtime Calculator to model cumulative amperage draw across your monitor and wireless receiver setup.
Included
TVLogic Lvm-173W-3G 17″ Monitor is avalable to rent at FRENEL rental.
