Description
FEELWORLD uses the professional Rec.709 HD color standard, and uses the color calibration technology, with the professional instrument calibration at the factory, it can achieve monitor calibration efficiently and get accurate color reproduction easily, do not distort the color, show the real image when you shooting video.
The FEELWORLD LUT7S monitor displaying your content at 323 pixels per inch (PPI), enables clear and precise field monitoring. The panel is made of optically bonded glass with an anti-reflective coating. But what really sets it apart is its light-emitting diode (LED) backlighting, which displays a 1200:1 contrast ratio and sRGB / Rec.709 Color Gamut. The wide 160º viewing angle makes it easy for multiple members of the crew to watch it at the same time.
Large Monitor with Easy Touch Controls
The innovative touchscreen LCD user interface provides incredible control. You can uses simple tap and swipe gestures for the important monitoring functions. Scopes can be enabled via the touch screen as well as focus and exposure assist. Plus you can load 3D LUTs!
Connect to Wireless Transmitter and Director Monitor
Transmission to film crew director monitoring at the same time. Without the cable more flexible to transition between scenes effortlessly for outdoor shooting. Display live picture on multiple displays simultaneously.
Attach to Cameras, Equipment Carts or Hang It Anywhere
There are 3 standard sized mounting points. Using the bottom 1⁄4 inch hole, you can securely attach it to the top of your camera. The 1⁄4-inch holes on the left and right sides can be mounted on other equipment with magic arm, bracket, etc., for the entire crew to monitor the screen.
Technical Specifications
PANEL
Panel Size
7″
Panel Type
LCD IPS
Panel Resolution
1920x1200pixels
Panel Aspect Ratio
16:10
Aspect Ratio Switch
Yes
Input Resolutions
SD 576i PAL(16:9)
SD 480i NTSC(16:9)
HD 720: 1280x720pixels(16:9 aspect ratio)
HD 1080: 1920x1080pixels(16:9 aspect ratio)
Frames Supported
24P @4096x2160Pixel
24P/25P/30P @3840x2160Pixel
24P/25P/30P/50P/50i/60P/60i @1920x1080Pixel
24P/30P/50P/60P @1280x720Pixel
25P/50i @720x576Pixel
30P/60i @720x480pixel
Contrast
1200:1
Brightness
2200 nits
Viewing Angle
160 Degrees
CONNECTIONS
Video inputs
3G/HD-SDI (BNC) x1
HDMI 4K x1
Video outputs
3G/HD/SD-SDI (BNC) (LOOP) x1
HDMI 4K (LOOP) x1
Audio inputs
2CH embedded audio SDI x1
2CH embedded audio HDMI x1
Audio outputs
Jack 3.5mm Phones x1
2CH Embedded Audio SDI x1
2CH Embedded Audio HDMI x1
GENERAL FEATURES
Monitor Features
Waveform
Vectorscope
Histogram
Zebra
Peaking
Zoom
False Color
Image freeze
Image Flip
Pixel to Pixel
Overlay – Scan Mode
Ratio Marker
Guides – Safety Marker
3D LUT Support
RGB Parade
Audio Meters
Tally
No
Speakers
Yes
MORE SPECIFICATIONS
Power
Sony NP-F970 Type battery
Power adapter
No. of battery slots
2
Power Consumption
20W
7-24V (2A) DC input
Warranty
1-Year
Country of Origin
China
PHYSICAL
Total Weight (KG)
0.495
Weight details
Weight does not include battery
Total Dimensions (WxHxD) (mm)
223x162x81
Power Consumption
⚡ FeelWorld LUT7 7″ (2200-Nit) • Electrical & Power Profile
- Operating Voltage: 7.4V DC (Dual Rear NP-F Battery Slots) / 7V to 24V DC (12V Barrel DC Input)
- Power Draw (Indoor / 50% Backlight): ~13W to 15W
- Power Draw (Maximum 2200-Nit Daylight Load): 20W Maximum (Official FeelWorld rating at 100% 2200-nit ultra-high brightness with 4K HDMI / SDI loop-through and scopes active; assuming 8.4V DC out is unused)
- On-Board Battery Standard: Dual rear Sony NP-F / L-Series battery slots (7.4V) for extended capacity and continuous hot-swapping
- External Supply Options: 12V DC barrel input (7V–24V wide range) via D-Tap to 2.1mm DC cable from a 14.4V V-Mount camera rig
⏱️ Estimated Operating Runtimes (20W Maximum Draw @ 85% Efficiency)
- 🔋 1x NP-F 570 (26Wh — Single Slot): ~1.1 hours (1h 06m)
- 🔋 1x NP-F 770 (47Wh — Single Slot): ~2.0 hours (2h 00m)
- 🔋 2x NP-F 770 (94Wh — Dual Slots): ~4.0 hours (4h 00m)
- 🔋 1x NP-F 980 (74Wh — Single Slot): ~3.1 hours (3h 09m)
- 🔋 2x NP-F 980 (148Wh — Dual Slots): ~6.3 hours (6h 17m)
- 🔋 V-Mount 98Wh (via D-Tap to DC): ~4.2 hours (4h 10m)
- 🔋 V-Mount 150Wh (via D-Tap to DC): ~6.4 hours (6h 22m)
- 🔋 V-Mount 190Wh (via D-Tap to DC): ~8.1 hours (8h 04m)
📊 Engineering Note: The 85% Efficiency Standard
- Usable Energy Derating: Published calculations apply a standard 0.85 multiplier (Usable Wh = Rated Wh × 0.85). Daylight-viewable monitors enforce an automated low-voltage threshold (~6.2V) to prevent panel shutdown, while the remaining variance accounts for thermal dissipation in the 2200-nit LED backlight array and DC-DC voltage conversion.
⚠️ Production Advisory: Utilizing the monitor’s auxiliary 8.4V DC Output to power a camera via dummy battery will significantly increase total wattage draw. Lowering brightness from 2200 nits when working indoors will substantially extend NP-F battery life.
🛠️ Full Rig Planning: Powering your FeelWorld LUT7 alongside your camera and wireless video transmitter? Access the interactive FRENEL Power & Battery Runtime Calculator to model cumulative amperage draw across your complete camera build.
Included
Feelworld LUT7S SDI is available to rent at FRENEL rental.
