Description
High resolution 800 x 480 LCD panel
HDMI Auto Color Space and Ratio detect
Manual Gamma Adjustment
Adjustable Backlight
Image Flip
1/4″-20 mounts on all sides (requires V-LCD70TMB-02 for side mount)
Robust Power switch
Rugged front panel
Variety of Markers, including user-adjustable)
False Color On/Off
Peaking Filter On/Off
RGB Check Field / Field Detect
15:9, 16:9, 4:3, Pixel-to-Pixel modes
4 user-configurable function buttons
Scratch Resistant Protective Screen
RGB gain and bias control
Variety of User-Replaceable Battery Adapters available
Technical Specifications
Screen Size (Display Area) 7.0-inch Diagonal (152.4mm x 91.44mm)
Resolution (Pixels) 800 x 480
Viewing Angle L/R: 140° U/D: 100°
Pixel Pitch (mm) 0.1905mm(H) x 0.1905mm(V)
Brightness (in cd/m²) 450
Contrast Ratio 600:1
Inputs Composite x 1, Component x 1, HDMI x 1
Loop-through outputs
Composite x 1, Component x 1
Dimensions 7.03″W x 5.67″H x 2.17″D
Approx. Weight 1.9 lbs.
Power Consumption 1 Amp (Max) @ 12VDC (12W Max)
Power Consumption
⚡ Marshall V-LCD70 7″ Field Monitor • Electrical & Power Profile
- Operating Voltage: 7.5V to 18V DC (12V DC Nominal via 4-Pin XLR / Coaxial DC Input & Snap-On NP-F Battery Adapter)
- Power Draw (Typical Indoor Operation): ~10W to 12W
- Power Draw (Maximum 800-Nit High-Bright Load): 14W Maximum (Official Marshall specification: 1.20A @ 12V DC with 800-nit backlight and active 3G-SDI / HDMI loop-through)
- On-Board Battery Standard: Rear interchangeable battery plate configured for 1x Sony NP-F / L-Series battery (7.4V)
- External Supply Options: 4-pin XLR or coaxial DC input (7.5V–18V) via D-Tap cable from a 14.4V V-Mount battery or 12V AC power supply
⏱️ Estimated Operating Runtimes (14W Maximum Draw @ 85% Efficiency)
- 🔋 1x NP-F 570 (26Wh): ~1.6 hours (1h 35m)
- 🔋 1x NP-F 770 (47Wh): ~2.9 hours (2h 51m)
- 🔋 1x NP-F 980 (74Wh): ~4.5 hours (4h 29m)
- 🔋 V-Mount 98Wh (via D-Tap to XLR/DC): ~6.0 hours (5h 57m)
- 🔋 V-Mount 150Wh (via D-Tap to XLR/DC): ~9.1 hours (9h 06m)
- 🔋 V-Mount 190Wh (via D-Tap to XLR/DC): ~11.5 hours (11h 32m)
📊 Engineering Note: The 85% Efficiency Standard
- Usable Energy Derating: Published calculations apply a standard 0.85 multiplier (Usable Wh = Rated Wh × 0.85). Broadcast field monitors enforce an automated low-voltage threshold (~7.2V on NP-F / ~11.5V on 14.4V systems) to prevent panel drop-outs, while the remaining variance accounts for thermal dissipation in the 800-nit LCD backlight and DC-DC regulation.
⚠️ Production Advisory: Because the Marshall V-LCD70 series requires a minimum of 7.5V DC on its external input, small or aged NP-F 570 batteries may hit the monitor’s low-voltage cutoff early under load; NP-F 770 / NP-F 980 packs or a 14.4V V-Mount D-Tap feed provide optimal voltage headroom.
🛠️ Full Rig Planning: Powering your Marshall 7″ monitor directly from your camera’s V-Mount battery? Access the interactive FRENEL Power & Battery Runtime Calculator to model cumulative amperage draw across your complete camera build.
Included
Marshall V-LCD70XP-HDMI HD 7″ LCD HDMI is available to rent at FRENEL rental.
